Back to explore


1628 Amber Cream

Composite of granules selected industrially and created in a large commercial slab with a maximum size of 300 cm x 120 cm, a nominal thickness of 6.6 mm and a weight of approximately 14kg/m².
It is obtained through vibro-compression and consists of about 93% selected granules of various types such as post-consumer recycled glass, recycled pre-consumer porcelain, glass mosaic, quartz, granite, mixed together, in different sizes, with a minimum quantity of polyester resin and coloured powder pigments.

Size and dimensions

  • 99 x 14,7 cm 99 x 14,7 cm
  • 29,85 x 29,85 cm 29,85 x 29,85 cm
  • 60 x 29,85 cm 60 x 29,85 cm
  • 60 x 60 cm 60 x 60 cm
  • 120 x 60 cm 120 x 60 cm
  • 300 x 60 cm 300 x 60 cm
  • 120 x 120 cm 120 x 120 cm
  • Custom Custom


  • Agglomerates


  • Smooth


  • Stone & glass Stone & glass


  • Kitchen
  • Bathroom
  • Bedroom
  • Living room
  • Outdoor
  • Flooring commercial
  • Flooring residential
  • Hotel
  • Showroom
  • Swimming pools and Spa
  • Work spaces


  • Contemporary
  • Modern
  • Natural
  • Traditional
  • Transitional


  • Low VOC emission
  • Recycled content foor LEED
How to buy


The large 300 x 120 cm format enables covering large areas with relatively few joints.
The lightness of the material, combined with its outstanding technical properties, allows for a variety of uses, especially in those environments where weight is critical, like apartments, ships and partition walls.
It is easy to cut on site, using the correct diamond cutting disc, and is sufficiently flexible to attain a radius or more than 70 cm, so is suitable for cladding curved surfaces. The agglomerate’s slim dimensions enable it to be used on top of existing surface materials.


This TREND Origina is suitable for wall cladding and flooring, even in areas with continuous traffic, both indoors and outdoors (OUTDOOR: NOT ALL COLORS CAN BE USED OUTDOOR. SOME COLORS, ESPECIALLY LIGHT COLORS, CAN SHOW YELLOWING AFTER 5 YEARS).
Using WATER-JET cutting, personalized designs or inserts can be created, or standard sizes cut so that sheets can be laid side by side, creating an effect of continuity.
It is also suitable for covering steps, raised floors and baseboards, as well as contouring around curved surfaces like columns.
For cladding surfaces such as tables and countertops, the Skin method is recommended, which provides for the application of a wooden support and assists with the creation of finished borders and seamless bonding to hide the joints.